a sparkling white color that repels the sun's heat and reduces the temperature in the building during summer.
fills cracks and waterproofs curved surfaces.
waterproofs all corners, boards and siphons.
suitable for all types of bathroom siphons.
stops underground water and keeps grounded rooms dry.
The end waterproofing layer is elastic and absorbs temperature expansions.
Does not require any additional reinforcement or corner strips. There is no overlapping of individual layers which makes it ideal for uneven surfaces.
The base must be clean, dry and should not crumble.
Separate part of the HS Polymer and dilute it with water in 1:1 ratio. The resulting consistency is applied as a primer.
After last layer has dried, a new layer of HS Polymer is applied without diluting it with water.
After the primer has dried, a new layer of HS Polymer is applied without diluting it with water.
Normalized
Non Porous
Porous
Horizontal
Vertical
You will receive a discount code immediately!
And we are going to pay for the delivery to any Econt office in Bulgaria!
No! All you need is HS Polymer, a brush and/or roller and water.
It is a polymer waterproofing of the type liquid rubber.
It depends on the temperature and humidity of the air, but HS Polymer is a quick-drying waterproofing.
Yes, HS Polymer is hyper-elastic which is why thermal expansion cannot compromise it. If applied to two separate substrates, the bond is strong and elastic enough so that it will not cause tearing or cracking.
Yes, HS Polymer waterproofing can be walked on.
If the waterproofing is sealed with another layer, for example, tiles. Life expectancy is over 100 years. In case HS Polymer is the final layer and is exposed to external weather conditions, there is a 5-year warranty. If before the end of the fifth year, only 1 more layer is applied (with a consumption rate of 400 grams per m2) life expectancy will be increased for 5 more years.
HS Polymer is an extremely clean product. There are no fillers or additives in it. Тherefor it has more than 95% whiteness, as a result of which it does not allow heating of the base.
Yes, there is no problem to apply it in a garage. But strong friction can reduce the life of the waterproofing.
Yes! It even increases the bonding strength.
Yes, it can be colored with our pigments. They are available separately and are mixed with the HS Polymer before use.
On a dry and clean surface. Concrete, metal, wood, plaster, bitumen, plastic, glass and others.
A primer layer plus two coats should be applied as a minimum. The total thickness is about 1 mm. which is completely sufficient to form a waterproof layer. Additionally, an unlimited amount of layers can be applied.
It is stored in the original container, at temperatures between +5 and +35 degrees. The container should not be kept in direct sunlight.
It cannot be applied at temperatures lower than 5 degrees.
No! Once it is dry, the waterproofing can withstand extreme sub-zero and positive temperatures.
HS Polymer is a widely used waterproofing that can be used both for external and internal use. It can be a final or intermediate layer. If you are still not sure - contact us!